feat 添加支架，标签开关

AlgorithmModule/include/AI_Edge_Algin.h

@@ -107,6 +107,7 @@ public:
 		int nAIErodesize;				// 边缘腐蚀强度
 		bool bSaveResultImg;			// 保存结果图片
 		SaveProcessType saveProcessImg; // 保存过程图片
+		bool bDetTag;					// 标签检测开关（关闭时不跑 Tag_Loc 模型）
 		bool bUseDrawRoi_Check;			// 是否用绘制的ROI进行校验
 		cv::Rect drawRoi;				// 绘制的 ROi;
 		cv::Mat drawMask;				// 绘制的maksk
@@ -122,6 +123,7 @@ public:
 			nAIErodesize = 7;
 			bSaveResultImg = false;
 			saveProcessImg = Save_Close;
+			bDetTag = true;
 			bUseDrawRoi_Check = false;
 			drawRoi = cv::Rect(0, 0, 0, 0);
 			if (!drawMask.empty())

AlgorithmModule/src/AI_Edge_Algin.cpp

@@ -248,7 +248,14 @@ int AI_Edge_Algin::Detect(const cv::Mat &img, DetConfig *pDetConfig, std::shared
     re0 = Get_Edge(0, img, pDetConfig, m_pDetConfig->strChannel, Big_roi, Big_outimg, true);
     cv::Mat Big_outimg_src = img(Big_roi[0].boundingRect());
     vecThreads.emplace_back([&]() { re1 = Get_Edge(1, Big_outimg_src, pDetConfig, m_pDetConfig->strChannel, Small_roi, Small_outimg, false); });
+    if (pDetConfig->bDetTag)
+    {
         vecThreads.emplace_back([&]() { re2 = Get_Edge(2, Big_outimg_src, pDetConfig, m_pDetConfig->strChannel, Tag_roi, Tag_outimg, false); });
+    }
+    else
+    {
+        m_pdetlog->AddCheckstr(PrintLevel_2, DET_LOG_LEVEL_3, "AI_Edge_Algin ", "bDetTag close, skip Tag_Loc");
+    }
     for (auto &t : vecThreads)
     {
         t.join();

AlgorithmModule/src/ImgCheckAnalysisy.cpp

@@ -815,7 +815,9 @@ int ImgCheckAnalysisy::CheckRun()
 			long handle_e = CheckUtil::getcurTime();
 			m_pdetlog->AddCheckstr(PrintLevel_1, DET_LOG_LEVEL_3, "Handle", "handle detect use time %ld", handle_e - handle_s);
 		}
-		// 标签检测(独立步骤)：暗场图像 + 明场 bigmask(不再沿用明场检出的标签)
+		// 标签检测(独立步骤)：暗场图像 + 明场 bigmask(不再沿用明场检出的标签)；bDetTag 关闭时跳过
+		{
+			if (m_pFuntion->function.f_supportDet.bDetTag)
 			{
 				long tag_s = CheckUtil::getcurTime();
 				int reTag = CheckTagByBigMask(m_CheckResult_shareP->in_shareImage->img, m_pEdge_Align_Result->bigmask);
@@ -829,6 +831,12 @@ int ImgCheckAnalysisy::CheckRun()
 					return m_nErrorCode;
 				}
 			}
+			else
+			{
+				m_tag_roiList.clear();
+				m_pdetlog->AddCheckstr(PrintLevel_1, DET_LOG_LEVEL_3, "Tag", "bDetTag close, skip tag detect");
+			}
+		}
 	}
 	else
 	{
@@ -949,10 +957,11 @@ int ImgCheckAnalysisy::CheckRun()
 
 	m_pdetlog->AddCheckstr(PrintLevel_0, "3、pre detect", "-------------------------pre Det---------------  \n");
 
-	/* 检测支架偏移 */
+	/* 检测支架偏移（bDetSupport 开关关闭时不做支架判定） */
 	{
 		Function_Support_Det &supportDet = m_pFuntion->function.f_supportDet;
-		if (supportDet.bOpen && supportDet.supportRect.size.width > 0 && supportDet.supportRect.size.height > 0)
+		if (supportDet.bOpen && supportDet.bDetSupport &&
+			supportDet.supportRect.size.width > 0 && supportDet.supportRect.size.height > 0)
 		{
 			cv::RotatedRect &inner = m_inner_rroi;
 			cv::RotatedRect &support = supportDet.supportRect;
@@ -1089,8 +1098,12 @@ int ImgCheckAnalysisy::CheckRun()
 		}
 	}
 
-	/* Tag检测 */
+	/* Tag检测（bDetTag 关闭时不上报标签 NG） */
 	{
+		if (!m_pFuntion->function.f_supportDet.bDetTag)
+		{
+			m_tag_roiList.clear();
+		}
 		for (const auto &tagRoi : m_tag_roiList)
 		{
 			// tag roi 在原图坐标系，按摆正仿射转换到检测图(detImg)坐标系
@@ -2529,6 +2542,7 @@ int ImgCheckAnalysisy::AI_Edge(const cv::Mat &img, cv::RotatedRect &outerRoi, cv
 	}
 	config.strChannel = DetImgInfo_shareP->strChannel;
 	config.pBaseCheckFunction = m_pbaseCheckFunction;
+	config.bDetTag = m_pFuntion->function.f_supportDet.bDetTag; // 标签检测开关：关闭时不跑 Tag_Loc
 
 	/* 定位获取三个roi */
 	int re = m_pAI_Edge_Algin.Detect(img, &config, m_pEdge_Align_Result);
@@ -2544,10 +2558,8 @@ int ImgCheckAnalysisy::AI_Edge(const cv::Mat &img, cv::RotatedRect &outerRoi, cv
 	{
 		innerRoi = m_pEdge_Align_Result->smallroi[0];
 	}
-	if (!m_pEdge_Align_Result->tagroi.empty())
-	{
+	// 无条件赋值：Tag_Loc 未检出或 bDetTag 关闭(tagroi 为空)时清空，避免残留上一张图的标签
 	tagroiList = m_pEdge_Align_Result->tagroi;
-	}
 
 	/*使用m_pEdge_Align_Result->bigmask检测把手是否缺失*/
 	{